Subscribe or unsubscribe our Mailing List
© COPYRIGHT NOTICE  All Rights Reserved

New production Sockets
PINS
     
4

Order Reference:
4Pin-Large

4-Pin Ceramic Socket. WIRED Version

Tubes like:
EL34, KT66, 6SN7, 5U4G, etc, with small octal base.

Not for KT88 or 6550 or other large octal base. 

First: This socket is highly recommended for free wiring, because you have very large double solder lugs, wozj double holes each. So you can mounts a great part of the components directly on the sockets.


Order Reference:
4Pin-Large-Gold

Same as above, but all metal parts are gold plated


Order Reference:
4Pin-Bajonett-Gold
Tubes like:
300B, 2A3, etc

UX4 Jumbo Style, Small Bajonet Type socket. 

Jumbo Style, Bajonet Type socket. 

Tubes like:
300B, 2A3, etc

All matal parts gold plated.

Will also work for tubes without bajonet pin, but you must be carefull how to put the tube in! Contacts and solder lugs are gold  plated.  The bajonett flange part is shiny polished and gold plated.


Order Reference:
4-Pin-YAM-
UX4-Silver

or
4-Pin-YAM-UX4-Gold

8-Pin TEFLON Socket. WIRED
For PCB or WIRING

Tubes like:
EL34, KT88, 5U4G, 6SN7

All matal parts silber plated bronze. Very high quality. Low  resonance because of soft Teflon Material. Click on YAMOMOTO in the left menu for more information

Pins Radius ca 17mm


Order Reference:
4Pin-JUMBO-845

Jumbo Style, Bajonet Type socket. 

Tubes like:
845, VT4C, 211
Jumbo Style, Bajonet Type socket. 

Contacts and solder lugs are silver plated. 


Order Reference:
4Pin-JUMBO-Gold-845
Same as above, but all metal parts are gold plated

Order Reference:
4-5Pin /Eu

B4/B5 Ceramic Socket. WIRED Version

B4 is the European socket from 1930....1945. Many famous tubes have this socket, like PX25, PX4 etc. Today many very nice rectifiers can still be found that use this socket. Rectifers are RGN... types, like RGN1064, RGN2504 etc. Check our NOS pages for some very nice tubes of this series. We have many on stock!


Order Reference:
4-5Pin /Eu-Gold
Same as above, but all metal parts are gold plated

Order Reference:
5Pin-Post

Very rugged ceramic socket.


Order Reference:
5Pin-Post-Gold
Same as above, but all metal parts are gold plated
 

Order Reference:
5Pin-Large-Gold

5-Pin Ceramic Socket. WIRED Version

Tubes like:
27, 67, etc

First: This socket is highly recommended for free wiring, because you have very large double solder lugs,that have two holes each, plus you can wind a wire around it. It has a "collar" for that, So you can mounts a great part of the components and wires directly on the sockets.

Second: These have have the great possibility to measure all signals directly through the frontplate, when you make the chassis hole wide enough. There is a copper pad for this, beneath each tube contact, and these can be accessed from above. Take care for isolation precautions when do this! We say it here officially: When you do this you need a cover over the amplifier, or anything else to prevent you touch the copper pads by mistake. If you do not want this, you should make the chassis hole small enough to cover the copper pads.

SEE MODEL:
4-PIN-LARGE


Order Reference:
7Pin-HQ-PCB

7-Pin Ceramic Socket. Printed Circuit Version

Tubes like:6AU6, 6AQ5

Very high quality contacts. Socket is covered by ceramic top plate. So only thin holes for tube pins are visible.  Perfect feeling when putting in the tube.  No side force on the pins / no bended tube pins, also not when the tube is removed very often.


Order Reference:
7Pin-HQ-Wired-Gold

7-Pin Ceramic Socket. Wired Version

Tubes like:6AU6, 6AQ5

All matal parts gold plated. Very high quality contacts. Socket is covered by ceramic top plate. So only thin holes for tube pins are visible.  Perfect feeling when putting in the tube.  No side force on the pins / no bended tube pins, also not when the tube is removed very often. Smooth feeling when putting in the tube.  No side force on the pins / no bended tube pins, also not when the tube is removed very often.


Order Reference:
7Pin-Post-Gold
Very rugged ceramic socket.

Order Reference:
8Pin-TF-Leads
Same as above, but all metal parts are gold plated
 

8-Pin TEFLON socket, with gold plated bronze contacts.

Tubes like: 6021W

This socket solves an old problem of tubes enthusiasts. The miniature tubes like 6021W, etc. are for sale still at reasonable prices. These are generally superb quality, and the latest generation of American tubes. As you know, noise level of tubes goes down with physical size. So actually these tubes are quite nice products. However the flying leads makes them uncomfortable to use. With these sockets they can now be used on amplifier printed circuits boards. The mechanical pin contact is very good, so when the tube is plugged in with all eight pins, it is fitted just as good as a normal tube. Additionally, it is recommended to use the Duende tubes rings for those tubes, and you have the ultimate tube combination! Another picture

Octal 

Printed Circuit Board Version

Widest distance between pins:
5,08mm or 0.2 Inch
(center to center)

On Teflon is marker point, which fits
mark on tube

Tubes like: 6021 or any other flying lead tube with maximum 8 leads


Order Reference:
8Pin-PCB

8-Pin Ceramic Socket. WIRED Version

Tubes like:
EL34, KT88, 5U4G, 6SN7

High Quality "Celch" Contacts. These have higher pull out force, and better contact. Specially recommended for power tubes and rectifiers, but of course are better for small signal tubes also.

Octal 

Printed Circuit Board Version

Pin Radius on PCB
SIde: 25,4mm  / One Inch

Tubes like:
KT88, EL34


Order Reference:
8Pin-HQ-Wired-Gold

8-Pin Ceramic Socket. WIRED Version

Tubes like:
EL34, KT88, 5U4G, 6SN7

All matal parts gold plated. High Quality "Celch" Contacts. These have higher pull out force, and better contact. Specially recommended for power tubes and rectifiers, but of course are better for small signal tubes also.

 

 

Order Reference:
8Pin-HQ-Wired

8-Pin Ceramic Socket. WIRED Version

Tubes like:
EL34, KT88, 5U4G, 6SN7

Standard Quality "Fork"" Contacts. These have lower pull out force, and are recommended when you plan frequent changing of the tubes. Like in guitar amplifiers.

Octal 

Wired Version

Tubes like:
KT88, EL34


Order Reference:
8/5Pin. YAM.
Octal-Gold

8/5Pin TEFLON Socket. WIRED
For PCB or WIRING

All matal parts gold over silver plated bronze.

Very high quality.  Low resonance because of soft Teflon Material.  Click on YAMOMOTO in the left menu for more information

Pins Radius ca 17mm


Order Reference:
8Pin-Large

8-Pin Ceramic Socket. WIRED Version

Tubes like:
EL34, KT66, 6SN7, 5U4G, etc, with small octal base.

Not for KT88 or 6550 or other large octal base. 

First: This socket is highly recommended for free wiring, because you have very large double solder lugs,that have two holes each, plus you can wind a wire around it. It has a "collar" for that, So you can mounts a great part of the components and wires directly on the sockets.

Second: These have have the great possibility to measure all signals directly through the frontplate, when you make the chassis hole wide enough. There is a copper pad for this, beneath each tube contact, and these can be accessed from above. Take care for isolation precautions when do this! We say it here officially: When you do this you need a cover over the amplifier, or anything else to prevent you touch the copper pads by mistake. If you do not want this, you should make the chassis hole small enough to cover the copper pads.

SEE MODEL:
4-PIN-LARGE

Order Reference:
8Pin-Large-Gold

Same as above, but all metal parts are gold plated

SEE MODEL:
4-PIN-LARGE

Order Reference:
8-Pin. P8/Au8-Gold

Very high quality 8 Pin Socket. Ceramic + gold plating

Tubes like:
AD1, AZ1, etc

.  Click on YAMOMOTO in the left menu for more information


Order Reference:
9Pin-PCB

9-Pin Ceramic Socket. 

Original item, as used long ago in PCB for radio and TV's. 


Order Reference:
9Pin-HQ-PCB

9-Pin Ceramic Socket. Printed Circuit Version

Tubes like:
EL84, 12AX7, ECC81

Very high quality contacts. Socket is covered by ceramic top plate. So only thin holes for tube pins are visible.  Perfect feeling when putting in the tube.  No side force on the pins / no bended tube pins, also not when the tube is removed very often.


Order Reference:
9Pin-HQ-Wired-Gold

9-Pin Ceramic Socket. WIRED Version

Tubes like:
EL84, 12AX7, ECC81

All matal parts gold plated. Very high quality contacts. Socket is covered by ceramic top plate. So only thin holes for tube pins are visible.  Perfect feeling when putting in the tube.  No side force on the pins / no bended tube pins, also not when the tube is removed very often. Smooth feeling when putting in the tube.  No side force on the pins / no bended tube pins, also not when the tube is removed very often.

 


Order Reference:
Plate-Cap 6.3

Ceramic Plate/Anode Cap with 6,3mm diameter

For tubes like PL504  

 

Order Reference:
Plate-Cap 9

Ceramic Plate/Anode Cap with 9mm diameter

For tubes like 807

 

Order Reference:
Plate-Cap 14
Ceramic Plate/Anode Cap with 14mm diameter
 
Subscribe or unsubscribe our Mailing List
© COPYRIGHT NOTICE  All Rights Reserved