YAMAMOTO SOUNDCRAFT / EQUIPMENT STANDS

enlarge	These are the unique YAMAMOTO MGB-1 magnetic equipment stands. They are made from black African Ebony wood. On the top of the stands are three plates of ceramic material. Inside the Ebony wood are two Neozeme magnet rings, these have the strength to carry 2...10 kilogram for one stand. Just put the stands under the equipment, no mounting is required. With these there is no mechanical contact of the equipment to the bottom. The equipment is floating free, resting completely on the magnetic field only. The best results are with any equipment with moving parts in it, like record and CD players, and with microphonic sensitive equipment like tube amplifiers and preamplifiers.
Enlarge	MGB-1 Technical data Outside dimension: 59mm in diameter, and height:58.8mm -47mm Quality of the material: An African blackwood, Neozium magnets, ceramic spacers Withstand load: 2kg - 10kg per piece Weight: 210g (one piece)
Enlarge	Design Award 2007 goes to Yamamoto MGB-1 feet Click in picture for more details. When you can read Japanese, here is the original web page

	PB9 Equipment Stand Dimensions: 34 x 12 mm. Height of the pin: 5 mm Material: the African ebony (specific gravity about 1.4) The price in the pricelist is for a set of 4pcs. These can also be used without the PB10
	PB10 Equipment Stand. Dimensions: 12 x 34 mm. Height of the pin: 3,5 mm Material: the African ebony (specific gravity about 1.4) The price in the pricelist is for a set of 4pcs.

Enlarge	PB20 Equipment Stand Dimensions: 41 x 22 mm. Height of the pin: 5 mm Material: the African ebony (specific gravity about 1.4) The price in the pricelist is for a set of 4pcs. These can also be used without the PB21
Enlarge	PB21 Equipment Stand Dimensions: 41 x 22 mm. Depth the pin hole: 3,5 mm Material: the African ebony (specific gravity about 1.4) The price in the pricelist is for a set of 4pcs.